Pipeline leak detection with a plumber is primarily used to detect if and where a leak has leaked into an oil or gas system that contains gases and liquids. Different methods of detection include infrared, hydrostatic testing, and electromagnetic energy after pipeline installation, and leak detection after repair work. This kind of leak detection can be conducted on underground or above-ground pipes or pipelines. There are instances when it may not be feasible to perform pipeline leak detection using these traditional techniques.
There are several different kinds of leak detection methods that can be used for detecting leaks on underground pipelines or pipes. When using hydrostatic technology, the investigator measures the precise location of the leak through the use of high-pressure water and soil sensors. The leak detection results are then recorded and sent for analysis. This method requires more excavation work. Some of the additional technologies that are being used for underground pipelines include carbon-digging, electromagnetic energy, or cable tracking.
Hydrostatic technology has been around for decades. This is one of the most common forms of leak detection used by pipeline engineers. The water system being investigated is placed in a tank that contains the solution. The tank is then pumped with water to create an infill and leak detection can begin. The majority of leak detection systems can detect the presence of wetting and will stop the flow of fluid if necessary. If these systems do not detect any liquid leaks, they are often left alone until the problem is resolved.
Another popular leak detection technology involves the use of electromagnetic energy. The leak detector sends out a beam of light at a certain frequency to pinpointing the exact location of the leak. This method is often used when large pipes or large sections of pipe need repair because it is difficult to pinpoint the exact location of the leak. This can be done by placing the leak detector in the service area and turning it on. Once the beam of light coming from the leak detector is detected, the service crew will know where to begin their repair work.
Another form of leak detection that can be utilized in a sewer system is the use of hydrostatic pressure testing. In this type of leak detection, an inspector works under the ground to search for leaks. The investigator will place a metal or wooden piping on top of the soil and install a wet trap. Once the trap detects the leak, an alarm is alerted and the local pipeline company or engineer is alerted so that the necessary steps are taken to repair the pipe.
Sewer pipeline leaks often occur in places where large amounts of debris accumulate. These are commonly found near sinks, in storm drains, or around water heaters and toilets. A sedimentation detection device is attached to the mainline coming into a house or building. When any sort of sedimentation occurs, the device sends out an alarm that triggers the first step of the leak detection process locating the source of the sediment. Once the source of the sediment is located, the first step taken is to isolate the location where the water loss occurred and make necessary repairs.
One of the most popular types of leak detection technology in use today is water transmission. Water transmission inspectors utilize video cameras to view the inside of pipes. If there is a water loss, the camera can detect the exact location of the leak, which allows for easy identification and repair. Water transmission pipelines are often installed below the surface of the soil but are not as easily found as other types of pipes. Because of the importance of keeping pipelines running smoothly, it is important to have a Plumber perform all types of pipeline inspections.
There are many more forms of leak detection technology available to businesses and individuals today. Some inspectors utilize metal detectors, while others may even employ hydrostatic pressure testing. While these two types of leak detection technology are both very useful, some businesses prefer to have a third type of inspection performed, using a camera pipe inspection system. Water cameras are designed to locate any areas of concern with accuracy. The camera directs light into a small hole or crack and identifies the exact spot that the water leak is located. This type of camera pipe inspection system can locate the exact spot and then trigger an alarm to sound the alarm.